We'll keep you informed about upcoming four wheel drive events around the country, exciting new products and special promotions.


          

Tactical Gear Security Drawer Custom Quote Form
*Required Fields

Enter Vehicle Information: * Make:
* Model:
* Year:

Drawer Options

* Total Units:

* Drawer Configuration:
Number of Drawers
per unit Desired:
Number of Drawers
per unit Desired:

Measuring your vehicle:
When measuring for the drawer size, it is best to get inside the vehicle and close the hatch. Take into consideration the desired drawer height in relation to the sloped rear seat and clearance limitations inside the rear door. Measure at smallest points. Also account for the drawer handle protruding 1 1/2" to clear tailgate hatch.

* Height:
in Overall enclosure height. Be sure to account for a slope in rear seat and any protrusions in rear hatch door.
* Width:
in Overall enclosure width. Make sure the drawer won't block anything that requires access such as side panels.
* Length:
in Overall enclosure length not including the drawer handle which protrudes 1 1/2".

Is there anything mounted inside the cargo area of the vehicle that limits the area a drawer can occupy?
Check all that apply:


Enter Prisoner Cage Make & Model

Is access needed to anything inside the vehicle underneath the spot where the drawer will be mounted?
Check all that apply:



If there is a false floor in the cargo area of the vehicle which is not a structural flat surface capable of supporting and fastening the drawer, a mounting kit may be required. Tuffy manufactures a variety of univeral mounting kits.
* Does it appear that a mounting kit may be required?


List any large items and sizes that you are intending to secure inside the drawer to make sure there is adequate room based on the exterior dimension required. Example: weapons, special equipment, etc.

The standard weight rating at 75% extension is 250 pounds evenly distributed.
* Is this sufficient for your application?

Enter required weight rating

The standard top enclosure rating is 300 pounds on single and stacked drawers, and 550 pounds on side by side drawers.
* Is this sufficient for your application?

Enter required weight rating

* Lock Type:

* Exterior Trim Kit:

(Available in Black, Light Gray, Charcoal Gray, and Tan)




* Interior Trim Kit:

(Available in Black, Light Gray, Charcoal Gray, and Tan)

Trim Kit Installation:


Build Your Own Divider Kit     
To accommodate all applications, dividers are available individually.
Front Partition Divider: (1) 7 1/2" Front Partition Divider.
Requires (1) Left to Right Divider
Qty:

Left to Right Divider: (1) Left to Right Divider
Qty:

Front to Back Divider: (1) Front to Back Divider
Qty:

Corner to Corner Divider: (2) Corner to Corner Dividers. 1 set of 2 opposing corner to corner dividers. Adjustable length creates 3 compartments in drawer (maximum of 2 sets per drawer to create 5 compartments per drawer).
Qty:

Carpet Trim Kit for Dividers:
(Available in Black, Light Gray, Charcoal Gray, and Tan)


Accessories
Foam for Weapons: These high quality and durable foam inserts are great for protecting weapons stored inside drawers from damage.
Single Weapon Foam Insert
(Holds 1 weapon in one divider compartment)
Qty:

Double Weapon Foam Insert
(Holds 2 weapons in one divider compartment)
Qty:

Multi-point Tie Down Rails: Tuffy's Tie Down Rails are greatfor organizing and securing loose items on top of the drawer. The unique design works with security straps, cables, bungee cords, etc. The Tie Down Rails also help secure the Vinyl Diamond Plate to the top of the drawer in high-use applications. Set of (2). For more information,
click here.
Add Multi-point Tie Down Rails to Quote

Gear Anchors: Tuffy's Gear Anchors are great for organizing and securing loose items on top of the drawer. The unique design works with security straps, cables, bungee cords, etc. The Gear Anchors also help secure the Vinyl Diamond Plate to the top of the drawer in high-use applications. Set of (4). For more information,
click here.
Add Gear Anchors to Quote

Pick N Pluck Foam: Pick N Pluck foam is a great way to protect items stored inside Tuffy products from damage. The Pick N Pluck Foam has small perforated squares that can be removed in the shape of things such as guns, cameras, etc.
Available for purchase here.

Contact Information
Title:
* First Name:
* Last Name:
* Company or Agency Name:

If no company or agency, please enter 'Individual'
Address:
City:
State:
Zip:
* Phone Number:
* Email Address:
How did you learn about our line of products?
Questions or Comments: