We'll keep you informed about upcoming four wheel drive events around the country, exciting new products and special promotions.


          

Tahoe, Expedition Tactical Gear Security Drawer - Short

Tahoe, Expedition Tactical Gear Security Drawer - Short


Show Picture 1Show Picture 2Show Picture 3Show Picture 4Show Picture 5



Tahoe, Expedition Tactical Gear Security Drawer - Short

SKU: 167-470350160-000-01
Tuffy Security Product’s Tactical Gear Security Drawers are the state of the art in secure gear storage and organization. These highly functional, highly secure, and fully customizable drawer units are precision crafted from 16 gauge steel in the USA.

The large drawers open smoothly on Tuffy’s exclusive slide system incorporating (8) heavy duty precision stainless steel roller bearings. They can be securely locked with Tuffy’s patented locking system to provide protection for tactical equipment and other valuables. In addition, Tuffy’s superior design and engineering results in a drawer that is typically lighter weight than others on the market.

Each drawer features Tuffy’s patented Pry-Guard II locking system which incorporates a 1/4” thick steel security latch. Unlike other cabinet type drawers on the market that use retrofitted cabinet or house locks, the Tuffy drawer incorporates a patented pushbutton latching mechanism similar to typical OEM automotive door latches for security and to prevent rattles and squeaking. This type of latching system secures the drawer shut while operating the vehicle without the need to lock and unlock the drawer every time access is needed. During on-duty use this is a real timesaver because the vehicle entry doors can be locked to prevent access to the drawer.

The Tuffy drawer slides have exclusive roller-stop features engineered into the slides to prevent the slides from shifting during normal vehicle operation. Also, the patented Tuffy rotary latch and rubber gasket combination is engineered to prevent any unwanted drawer movement during normal vehicle operation which is the primary cause of rattling and squeaking in competitors metal and wood drawers with metal latches.

When higher security is required, the drawer can be locked as well. All of Tuffy’s drawers and other locking vehicle accessories can be keyed alike with a highly secure 10 Tumbler double bitted key. Optional combination pushbutton locks can be added for convenience.

Call 800.348.8339 for volume and government pricing.
Features:
  • Patented Pry-Guard II locking system with a 1/4” thick steel latch which enables the drawer to be latched closed without locking for convenient access. (Side by side or stacked drawers feature one latch per drawer)
  • Patented Anti-twist push button lock system with a 10 tumbler double bitted security key containing built in weather seals
  • Unlike other cabinet type drawers on the market that use retrofitted cabinet or house locks, the Tuffy drawer incorporates a patented pushbutton latching mechanism similar to typical OEM automotive door latches.
  • Optional Combination pushbutton lock can be added to the Pry-Guard locking system
  • Weatherproof design
  • Tab-loc welded 16 gauge steel construction
  • Typically lighter weight than others on the market through superior engineering
  • Durable Powder Coat Finish
  • Heavy duty, space saving, bottom mount roller bearing slides feature (8) Precision ground stainless steel sealed roller bearings mounted in an innovative 1/8" thick steel slide system. Pulls out 75% and rated to 250# evenly distributed on standard drawer.
  • Heavy duty reinforced 1/8" and 16 gauge thick welded top cross supports. Top is rated to 300# evenly distributed (Side by side models are rated to 550# evenly distributed.
  • Heavy duty drawer cross brace
  • Large comfortable handle
  • Grade 8 mounting hardware included
  • Drawer is pre-punched on 1" centers for dividers in a variety of configurations (Sold separately)
  • Key alike available for multiple products in a vehicle or fleet applications
Custom sizes are available. Single drawers, side by side drawers or stacked drawers of varying sizes are all available configurations. Standard material is steel but any drawer can also be constructed from aluminum with steel slides. Please fill out our custom quote form or call for pricing, options and manufacturing/delivery time.

For a quote on a custom size, please fill out our custom quote form.
Part #167-470350160-000-01:

Colors: Black

Exterior Dimensions: 47"W x 35"L (Plus 1 1/4" for handle) x 16"H

Interior Dimensions: 44 3/4"W x 34 9/16"L x 13 1/4"H (Less 1 9/16" at center for striker)

Shipping Weight: 234 lbs.
Fits:
  • Chevy Tahoe with Prisoner or K9 cage (Check measurements in vehicle before ordering. An optional mounting kit #298 is available to elevate drawer by 1 inch.)
  • Ford Expedition with Prisoner or K9 cage (Check measurements in vehicle before ordering. An optional mounting kit #186 may be necessary if the vehicle has 3rd row seats (must be removed), or has the floor configuration to accept the 3rd row seats under a non-structural floor cover. This kit is not necessary if there is a solid structural flat floor in the cargo area suitable for mounting and supporting the drawer enclosure.)
Mounting:
Mounts to the floor of the vehicle. View Assembly Instructions PDF


Drawer Options
Chevy Tahoe Mounting Kit [Add $122.00]
SKU: 298-01

Chevy Tahoe riser mounting kit. This kit is necessary to use in combination with certain Tactical Gear Drawer configurations (depending on drawer length-to-height configuration). This kit is not necessary for all Tahoe vehicles or drawer sizes/ configurations. Kit includes (2) support plates and (4) 1" riser bracket assemblies.

View Tahoe mounting instructions PDF
Ford Expedition Mounting Kit [Add $200.00]
SKU: 186-01

Ford Expedition riser mounting kit. This kit is necessary if the vehicle has 3rd row seats (must be removed), or has the floor configuration to accept the 3rd row seats under a non-structural floor cover. This kit is not necessary if there is a solid structural flat floor in the cargo area suitable for mounting and supporting the drawer enclosure. The jack is still accessible when the drawer is removed from the enclosure. Kit includes (2) support plates, (2) 2" riser bracket assemblies and (2) 5"-8" adjustable riser bracket assemblies.

View Expedition mounting instructions PDF
Combo Lock [Add $204.00]
SKU: 280-01

This bolt on lock option offers easy access to drawers with a combination while maintaining key entry. This is a great option when access is required for multiple users.
Exterior Carpet Trim Kit [Add $95.00]
SKU: 229-470350000-002-01

Exterior Carpet Trim for drawer. Top only with adhesive black PVC trim, installed by customer. Requires adhesive (sold separately).
Vinyl Diamond Plate Trim Kit [Add $131.00]
SKU: 864-470350000-002-01

Exterior Vinyl Diamond Plate Trim Kit for drawer. Top only with adhesive black PVC trim, installed by customer. Requires adhesive (sold separately). For high use applications, installing Gear Anchors close to each corner for additional support is recommended.
Interior Carpet Trim [Add $113.00]
SKU: 230-470350160-000-01

Interior Carpet Trim for drawer, installed by customer. Requires adhesive (sold separately).
Single Front Partition Divider [Add $12.00]
SKU: 168-000000160-110-01

(1) 7 1/2" Front Partition Divider, not installed. Fits with or without carpet trim. *At least one Left to Right Divider Required.
Carpet Trim for Front Partition Divider [Add $6.00]
SKU: 231-000000160-100-01

(1) Carpet trim piece for Front Partition Divider, not installed. Requires adhesive (sold separately).
Single Left to Right Divider [Add $69.00]
SKU: 168-470000160-110-01

(1) Left to Right divider, not installed. Fits with or without carpet trim.
Carpet Trim for Left to Right Divider [Add $21.00]
SKU: 231-470000160-100-01

(1) Carpet trim piece for Left to Right divider, not installed. Requires adhesive (sold separately).
Single Front to Back Divider [Add $56.00]
SKU: 222-000350160-110-01

(1) Front to Back Divider, not installed. Fits with or without carpet trim.
Carpet Trim for Front to Back Divider [Add $19.00]
SKU: 232-000350160-100-01

(1) Carpet trim piece for Front to Back divider, not installed. Requires adhesive (sold separately).
1 set of 2 Corner to Corner Dividers [Add $202.00]
SKU: 233-470350160-210-01

(2) Corner to Corner dividers. 1 set of 2 opposing corner to corner dividers. Adjustable length creates 3 compartments in drawer (maximum of 2 sets per drawer to create 5 compartments per drawer). Not installed. Fits with or without carpet trim.
Carpet Trim for Corner to Corner Dividers [Add $50.00]
SKU: 234-470350160-200-01

(2) Carpet trim pieces for Corner to Corner dividers, not installed. Requires adhesive (sold separately).
Single Weapon Foam [Add $137.00]
SKU: 279-440020095-210

Single Weapon Foam insert assembly, 2" firm foam affixed together but not installed. Dark gray.
Cavity size: 40 3/4"W x 2"L x 9 1/2"H
Overall size: 44 3/4"W x 6"L x 11 1/2"H
Requires (1) Left to Right divider.
Double Weapon Foam [Add $207.00]
SKU: 279-440020095-220

Double Weapon Foam insert assembly, 2" firm foam affixed together but not installed. Dark gray.
Cavity size: 40 3/4"W x 2"L x 9 1/2"H
Overall size: 44 3/4"W x 10"L x 11 1/2"H
Requires (1) Left to Right divider.
Summary
Base Price: $1,466.00
Customized Price: $1,466.00
CALL TO ORDER 1-800-348-8339